Cobetter CSSC Cylindrical Stainless Steel Wire Cloth Sintered Filters with multiple layers of 304 or 316 sintered stainless steel wire cloth that result in superior strength and corrosion and thermal resistance. Even under high pressure, the pores remain homogeneous while providing stability throughout the filter. This type of filter is ideally suited for solid/liquid solution separation where there are rigid particles. A long lifespan with great reusability.
Materials of Construction
Protective Layer | 304/316 Stainless Steel |
Filter Layer | 304/316 Stainless Steel |
Dispersion Layer | 304/316 Stainless Steel |
First Reinforcing Layers | 304/316 Stainless Steel |
Second Reinforcing Layers | 304/316 Stainless Steel |
Diameters | 60 mm |
Additional Diameter Specifications Available Upon Request
Double Open-End (DOE) | |
Sigle Open-End (DOE) |
Max. Differential Pressure | 3.0 bar / 21°C (forward flow) |
Recommended Continuous Operating Temperature Range | -75°C to +200°C Note: Temperature dependant on o-ring compound |
Parameters
Code | Liquid Pore Size (μm) | Removal Rating (μm) | Pore Efficiency | Absolute Removal Rating(μm) | Average Air Permeability (L/dm2min) | Flow Rate (m3/h) |
1 | 2.0 | 0.8 | 38% | 8 - 9 | 2.35 | 0.25 |
2 | 5.0 | 1 | 12 - 14 | 2.42 | 0.43 | |
3 | 10 | 3 | 16 - 18 | 3.00 | 0.50 | |
4 | 20 | 15 | 28 - 32 | 4.50 | 0.58 | |
5 | 40 | 25 | 58 - 63 | 7.10 | 0.67 | |
6 | 100 | 85 | 125 - 130 | 16.20 | 0.8 |
Bubble Point Testing
Tested according to GB/T8786; Differential Pressure of 200Pa (in air)
Liquid Viscosity of 1 CP·S; diameter of 65mm; length of 10inches; pressure of 1.0bar
Nominal Length | Filtration Area |
5 in. (127 mm) | 0.025 m2 |
10 in. (254mm) | 0.05m2 |
20 in. (508mm) | 0.10 m2 |
30 in. (762mm) | 0.15 m2 |
40 in. (1016mm) | 0.20 m2 |
Length and Other Sizes Are Customizable
Tested Filter Diameter is 65mm
Removal Ratings | End Cap | Diameter | Nominal Length | Seal Material | -F | |
CSSC | 0200=2.0μm | DOE=Double Open End | D25=25mm | 05= 5" | S=Slilicone | |
0500=5.0μm | TC=222/Flat | D30=30mm | 10= 10" | E=EPDM | ||
1000=10μm | SC=226/Flat | D50=50mm | 20= 20" | V=Viton | ||
2000=20μm | L=Screw | D65=65mm | 30= 30" | P=PFA/Viton | ||
4000=40μm | D70=70mm | 40= 40" | F=PTFE | |||
100H=100μm | ||||||
Contaminants | Methods |
Metal/rigid particles | Ultrasonic cleaning with frequent vibrations to remove particles |
High pressure spray prior to reusing | |
Flocculents (hair/strips/etc.) | igh temperature baking, carbonizing, and vaporizing |
Colloids | Soaking in a solvent to dissolve colloid |
Length and Other Sizes Are Customizable